Siemens Gigaset 3000 - Manual (Page 9)

9
Introduction
● The devices offer a high level of privacy. No protection
can be guaranteed against illegal bugging using other
radio receivers.
● When operating the handset, a basic distinction is made
between:
– telephone/switching functions, e.g. when a call is in
progress
– local functions, e.g. the display when the handset is
on.
● Local functions can also be performed in the charging
shell.
● Local functions can be cancelled with the on-hook key
Á before they are stored or saved.
● The local function is cancelled and the caller reaches you
if you receive a call while you are performing local func-
tions.
● Even if you remove the battery, your telephone directory
entries, all settings and your PIN are not lost.
● The call charge display at the handset depends on the
Hicom 300/300 E/300 H setting.
● Displays from the system do not contain muted vowels or
special characters.
● The handset can be implemented as a second executive
telephone with limited functions.
● The emergency number function is not supported by
Hicom cordless E.
● Any dial pauses entered – display P – are not recognised by
Hicom cordless E and are ineffective.
● The
?0  $@*@*)! 
function cannot be used with
Hicom cordless E. The DTMF Suffix Dialling Hicom func-
tion can be used as an alternative, (see page 59).
● Operation at a Gigaset base station is possible in accord-
ance with the Gigaset operating instructions.
General operating instructions