Stewart Filmscreen Corp CM-1005 - Manual (Page 5)

You will need:
‹ Enough ladders for the personnel supporting the screen during
the mounting process
‹ A level
‹ Fasteners appropriate for the surface on which the screen is
being mounted (See instructions for the type of mount for
recommendations.)
‹ A wrench (supplied)
Note: This manual refers to “AC” to represent electrical power. Your
location may use 120 V, 220 V, or other electrical power. Screen systems
are manufactured using the electrical power type specified for the location.
Use appropriate power sources for your location.
Unpacking
1. Remove the outer plastic covering and white wrapping paper
surrounding the screen case.
2. Do not remove the wrapping paper surrounding the screen roller.
You should remove it only after the unit is hung and all electrical
connections have been made.
Visionary Electriscreen: Owner’s Manual 3
Caution
During installation, do not place the unit on an unstable
cart, stand, table, or ladder. The unit may fall, causing injury
to a child or adult and damage to the unit.