Smeg LBS 635 - Manual (Page 6)

6 6
EN
Installation
1. Removing the packaging reinforcements
Your machine must stand level and
balanced on its feet in order to operate
more silent and vibration-free.
First loosed the plastic counter nut on the
adjustable feet of your machine.
After maintaining the balance by
adjusting the feet, tighten the plastic
counter nut upwards.
2. Removing the transportation safety bolts
Before operating the machine, the
transportation safety bolts must definitely
be removed. For this,
1. Loosen the “C” bolts thoroughly by
turning them anticlockwise with the help of
a suitable wrench.
2. Pull off the transportation safety bolts.
3. Insert the “P” plastic caps in the
direction of arrow into the holes from where
the transportation safety bolts are removed.
Please note! Keep the transportation safety
bolts in a safe place in order to reuse them
for any other transportation.
Transport your washing machine with the
transportation safety blots installed.
3. Adjusting the feet
To remove the packaging reinforcement lean
the machine backward, take the
reinforcement by pulling from the braid.