Siemens W12 - Manual (Page 11)

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Deleting outgoing call
Be sure the handset or the base is in standby.
Press the Outgoing Call (Redial) ͩ key or Channel/Select key until
“Outgoing Call” appears on the display.
Press Ʒ or ͩ key to select the outgoing records.
Then press the Flash/Clear key. The screen will display “Delete”.
Press Flash/Clear key again to confirm to delete the selected record,
or press Exit key to give up.
Deleting all outgoing call
Be sure the handset or the base is in standby.
Press the Outgoing Call (Redial) ͩ key or Channel/Select key until
“Outgoing Call” appears on the display.
Then long press the Flash/Clear key, do not release it until the LCD
displays “Delete All”.
Press Flash/Clear key again to confirm to delete the selected record,
or press Exit key to give up.
Using/Charging Indicator
When the handset is using or charging, the Using/Charging Indicator
will on automatically.
When a call is coming, the Using/Charging Indicator will on and
flash.
Call ending function
Press the End/Delete when finishing a call. Then you can make
another call.
Note: Do not use key to end a call; otherwise the phone will hang up.
Switching channels
In events of interference when using the handset talking, press
Channel/Select key to switch to another channel.
11