Siemens W12 - Manual (Page 15)

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03
Marking a directory entry as VIP
If a number is set to be a VIP one, when receiving such a call, you will
hear the VIP ringer tone.
How to set the VIP call:
Press the Channel/Select key until “Store” appears on the display.
Press Ʒ or ͩ key to browse the records.
Press the Mem/Prog key and “VIP” will appear on the display.
(Press Mem/Prog again to cancel the VIP setting.)
Note: When finished, press the Exit key to exit.
Dialing from stored caller-ID
Be sure the handset or the base is in standby.
Press Select key until “Store” appears on the display. Or press Mem/Prog
key to enter the two-digit storing location (01-16).
Press Ʒ or ͩ key to browse and select the stored records. If too long,
press the Next key to display other lists.
Then press the Talk key to dial the selected number.
Or
Press the Talk .
Press the Mem/Prog key.
Then enter the location in the directory (01-16).
Deleting a number in the Directory
Be sure the handset or the base is in standby.
Press the Channel/Select key until “Store” appears on the display.
Press Ʒ or ͩ key to browse and select the incoming records.
Then press the Delete, and then the screen will display “Delete”.
Press “Delete” again to delete the selected record.
Deleting all numbers in the Directory
Be sure the handset or the base is in standby.
Long press the Channel/Select key until “Store” appears on the display.
Then press the “Delete”. Do not release it until the screen displays
“Delete All”.
Press “Delete” again to delete all the records.
15