Sony CDP-NW10 - Manual (Page 30)

30 US
Chapter 4 Playing Discs
(DVP-NW50 only)
Default (this page)
All the settings explained on pages from 28 to 29 return to
the default settings.
Tip
If you select “OTHERS” in “Audio,” “Subtitle,” or “Disc Menu,”
select and enter a language code from the language code list
(page 55) using the numeric buttons.
To reset all of the settings
1 Press DVD SETUP on the remote when the Unit is in
stop mode.
The Setting Menu appears.
2 Press G/g to select (Preference,) then press
ENTER on the remote.
The options for “Preference” appear.
3 Press F/f to select “Default,” then press ENTER on
the remote.
Using the Setup Display (DVD Settings) (continued)
4 Select “Reset,” then press ENTER on the remote.
All the settings explained on pages from 28 to 29 return
to the default settings. Do not press X/1 (POWER)
while resetting the Unit. It may take a few seconds to
complete.