Cut recording – Sony DCR-VX9000 User Manual

Page 35

Advertising
background image

35

Advanced operations

You can make a recording with a stop-motion animated effect using cut recording. To
create this effect, alternately move the subject a little and make a cut recording. Secure
the digital camcorder and use the Remote Commander for effective cut recording.
(1) While the digital camcorder is in Standby mode, open the cover, then press MENU

to display the menu in the viewfinder.

(2) Press

or

to select FRAME REC, then press EXECUTE.

(3) Press

or

to select ON, then press EXECUTE.

(4) Press MENU to erase the menu display.
(5) Press START/STOP on the digital camcorder or the Remote Commander to start

cut recording.
The digital camcorder records about 6 frames, then enters recording Standby mode.

(6) Move the subject, and repeat step 5.

Cut recording

1

2

3

5

MENU

D ZOOM OFF
16 : 9 WIDE
ZEBRA
COMMANDER
BEEP
FRAME REC
INT REC

[ MENU ] : END

MENU

FRAME REC OFF
ON

[ MENU ] : END

MENU

D ZOOM
16 : 9 WIDE
ZEBRA
COMMANDER
BEEP
FRAME REC ON
INT REC

[ MENU ] : END

START/STOP

MENU

To cancel cut recording

Set the FRAME REC mode to OFF in the menu system.

Notes on cut recording
• The portion immediately after cut recording is completed may be longer than four

frames.

• You cannot do cut recording with photo recording.
• The remaining tape indicator may not be accurate if you do cut recording repeatedly.

If you change the mode as follows, cut recording is cancelled
• Turn STANDBY down to LOCK.
• Set the POWER switch to OFF or CAMERA/VTR to VTR.

Advertising