SMC Networks EliteConnect Wireless Bridge SMC2586W-G - Manual (Page 32)

From the table, a WDS link can be establish between two APs, a BM-BS link
can be established between a Bridge Master and a Bridge Slave, but no wire-
less link can be established between a Bridge Slave and an AP.
Fig. 24 Connectivity Limitation.
In Fig. 24 packets from STA cannot reach X, and vice versa.
Changing Password
Fig. 25 Password.
On this page, you can change the user name and password for the rights to
modify the configuration of the SMC2586W-G. The new password must be
typed twice for confirmation.
Managing Firmware
Fig. 26 Firmware management protocol setting.
Firmware management operations for the SMC2586W-G include firmware
upgrade, configuration backup, configuration restore, and configuration
reset. Firmware upgrade, configuration backup, and configuration restore can
be achieved via HTTP or TFTP. The HTTP-based way is suggested because it’s
more userfriendly. However, due to different behavior of different Web
31