SMC Networks EliteConnect Wireless Bridge SMC2586W-G - Manual (Page 47)

2. Set the Access control type to inclusive.
3. Specify the MAC address of a wireless client to allow access, and then
click Add.
4. Repeat Step 3 for each other wireless client.
To delete an entry in the access control table:
• Click Delete next to the entry.
NOTE: The size of the access control table is 64.
Fig. 49 MAC ACL download settings.
Instead of manually entering MAC addresses to the access control table one
by one, you can prepare a text file that contains all the MAC addresses and
put it on a TFTP server, and then download the MAC ACL (Access Control
List) file from the TFTP server to the SMC2586W-G. Fig. 50 shows the
contents of a sample ACL file.
Fig. 50 Sample MAC ACL file.
To download a MAC ACL file from a TFTP server:
1. Specify the IP address of the TFTP server in the TFTP server IP address
text box.
2. Specify the name of the MAC ACL file on the TFTP server in the MAC
ACL file name text box.
3. Click Download.
46