Siemens M75 - Manual (Page 27)

Calling 26
© Siemens AG 2003, E:\Auftr
ag\Siemens\MobilePhones\M75
Sirius\en\LA\SIR_Phone.fm
Template:
X75, Version 2.
1; VAR Language: en; VAR issue date:
050524
left page (26) of M75 Sirius FUG en, A31008-H7430-A1-1-7619 (04.06.2005, 09:01)
Incoming calls during a call
You may need to register for this
service with your service provider
and set your phone accordingly
(p. 82). During a call, you may be ad-
vised that there is another call wait-
ing. You will hear a special tone dur-
ing the call. You have the following
options:
• Accept the waiting call in addition
to the first
§Swap§ Accept the waiting call,
putting the current call on
hold to do so.
Always proceed as above to swap be-
tween the two calls.
• Reject the waiting call
§Reject§ Press.
Or
§Divert§ The waiting call is divert-
ed, for example, to the
mailbox.
• Accept the waiting call and end the
current call
B
End the current call.
C
Accept new call.
End call(s)
B
Press the End key.
After the Return to held call? display,
you have the following selection:
§Yes§ You accept the call on
hold.
§No§ You end the second call
too.
Conference
b
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your serv-
ice provider or may have to be ena-
bled specially.
A connection has already been
established:
C
Open the call menu and
select Hold . The current
connection is maintained.
J
Now dial a new number.
When the new connec-
tion is established ...
C
... Open the call menu and
select Conference . The
held call is joined.
Repeat procedure until all partici-
pants are linked together (up to
5 participants).