Sprint Nextel C201 - Manual (Page 15)

Section 1
Getting Started With Your PCS Connection Card 11
8.
Click
Finish
to exit the Installation program. The
Install
window
will appear (see Figure 6).
Figure 6: Install window
9.
You are required to restart your computer in order to complete the
Wireless Connection Manager Software installation procedure. Click
OK
to reboot your computer.
10.
Once your computer has rebooted, insert the PCS Connection Card
into your computer’s PC card slot (see “Inserting and Removing
Your PCS Connection Card” on page 12 for more information).
Windows will detect the new hardware and will install the necessary
drivers. The
Found New Hardware
window or
Found New
Hardware
Wizard will appear, depending on your operating system
(see Figure 7).
Figure 7: Found New Hardware window
Note: If the message “Digital signature not found” appears, you will need
to click Yes to properly install the hardware driver. When installing to
Windows 2000 or Windows XP, the message will appear three times; click
Yes each time to properly install the driver.