Sprint Nextel C201 - Manual (Page 16)

Section 1
12 Getting Started With Your PCS Connection Card
Inserting and Removing Your
PCS Connection Card
Before you insert the PCS Connection Card, you must first install the
Wireless Connection Manager Software. Once you have completed the
installation procedure, you may insert your card into your computer’s PC
card slot. The Sprint label should be facing up, and the 68-pin connector,
located at the end of the card, should be inserted directly into the
computer’s PC card slot.
Note: The PCS Connection Card should fit snugly, but you should be able to
insert or remove it easily from your computer’s PC card slot.
A portion (the black section) of the card will remain outside the
computer’s PC card slot. This section contains the card’s antenna and the
LED (light emitting diode). Because the card is not entirely contained in
your computer’s PC card slot, it is important to remove the card when
transporting your laptop or notebook.
To remove your card, you must first stop the card using the PC card tray
icon
, located in the bottom-right corner of your desktop. Click the
icon and select
Stop
from the dialog box.
Once your card has been stopped, press the PC card eject button, located
on your computer, and remove the card completely from the PC card slot.