Sony MZ-R501 - Manual (Page 11)

model name1[MZ-R501/R501PC/R501DPC] model name2[MZ----]
[3-234-036-13(1)]
masterpage:Right
filename[\\Ww001\WW001\ON GOING\MZ-R501\3234036131MZR501UCE\02GB-
MZR501UCE\030GET.fm]
11
2
Record an MD.
1 Press N while pressing REC.
Recording starts.
2 Play the source you want to record.
To stop recording, press x.
After you press x and “Edit” stops
flashing in the display, the recorder will
automatically turn off after:
— about 10 seconds when using a
battery.
— about 5 minutes when using the AC
power adaptor.
Notes
• “Saving” or “Edit” flashes while data of the recording (the track’s start and end points, etc.) is being
recorded. Do not move or jog the recorder or disconnect the power source while the indication is
flashing in the display.
• The lid does not open until “Edit” disappears in the display.
REC
x N
To Press
Record from the end of the
previous recording
1)
END SEARCH and press N while pressing REC.
Record partway through the
previous recording
1)
N, > or . to find the start point of
recording and press x to stop. Then press N
while pressing REC.
Pause X 2)
Press X again to resume recording.
Remove the MD x and open the lid. 3) (The lid does not open while
“Edit” flashing in the display.)
1) By setting “R-Posi” to “Fr End”, recording operations will always start from the end of the
previousely recorded material (page 19).
2) A track mark is added at the point where you press X again to resume recording while pausing; thus
the remainder of the track will be counted as a new track.
3) If you open the lid while “R-Posi” is set to “FrHere,” recording will begin with the first track the next
time you record (page 19).
020REG.book Page 11 Monday, November 5, 2001 1:37 PM