Sony MZ-R501 - Manual (Page 28)

28
Moving recorded tracks
You can change the order of the recorded
tracks.
Example
Move track C from the third to the second
track
1
While playing the track you want to
move, press MENU/ENTER, press
SELECT
>/. repeatedly until
“EDIT” flashes in the display, and
then press MENU/ENTER again.
“
” and “Name” flash in the
display and the recorder plays the
selected track repeatedly.
2
Press SELECT >/. repeatedly
until “ ” and “Move” flash in the
display, and then press MENU/
ENTER.
For the example above, “003
t” and
“ t 003” appear alternately in the
display.
3
Press SELECT >/. to select
the destination track number.
For the example above, “003
t” and
“ t 002” appears in the display.
4
Press MENU/ENTER again.
The track moves to the selected
destination track.
To cancel moving
Press x.
Adding a track mark
You can add track marks so that the part
after the new track mark is counted as a
new track.
The track numbers will increase as
follows.
1
While playing or pausing an MD,
press T MARK at the point you want
to mark.
“MK ON” appears in the display, and
a track mark is added. The track
number will increase by one.
To add track marks while
recording
Press T MARK at the point you want to
add a track mark.
You can use Auto Time Stamp to add
track marks automatically at specified
intervals (except while digital recording)
(page 19).
A C D B
A B D C
Before moving
After moving
x
MENU/ENTER
SELECT >/.
1 3 4 2
2 3 1 4 5
Add a track mark
Track numbers increase
T MARK