Smeg ALFA41XE2 - Manual (Page 8)

25
Instructions for the User
4.4 Running a program
From the “OFF” status proceed as follows:
• Turn the knob to the or symbols to select one of the available
programs from P01 to P38. The display will show the parameters of
the selected program in rotation.
• To start the program press the “START” button. The appliance will
perform a preheating cycle, showing the message “PrEh” on the
display.
• When preheating is finished, a series of beeps lasting 3 seconds
indicate that is possible to proceed with the cooking operation. The
message “PrEh” will flash on the display.
• To start the cooking, keep the “START” button pressed for 2 seconds.
The display will show, in order, the temperature set, the time
remaining until the end of cooking and the program selected.
• It is possible to start the cooking early before the preheating
temperature is reached, by keeping the “START” button pressed for 3
seconds.
• During the last minute of cooking, only the countdown of the
remaining 60 seconds will be displayed. At the end, a beep and the
text “End” flashing (for 20 minutes) will indicate that the cooking has
been completed.
• To return to the “OFF” status keep the “STOP” button pressed for 4
seconds.
4.4.1 Extending a cooking operation
When a cooking operation finishes, it is possible to extend it manually:
• While the display is showing the message “End”, press the “START”
button; the text “tP00” will appear on the display.
• Turn the knob to the or symbols to set the additional minutes of
cooking; at most 20 extra minutes are allowed.
• To start cooking with the extra time that has just been set, press the
“START” button for at least 2 seconds.
• At the end of cooking, the text “End” will continue to flash for the next
20 minutes and the oven light will remain on.