Sears 125.15884800 - Manual (Page 9)

9
Step 8
Line up the side handle with the
corresponding holes on the side of the
cabinet as shown. The handles must be
positioned upright with the bolt holes on the
bottom as shown. Insert two
10-24 X 5/8” bolts from the outside and
thread into the holes in the side of the
cabinet as illustrated. Tighten securely.
Complete steps for both sides of the cabinet
assembly.
Step 9
Insert the wood box rack into the bottom of
the smoker. The feet of the rack sit in the
four indentations in the bottom.
Step 10
Set the wood chip box onto the rack. Make
sure it is seated properly and securely in
the center of the rack. Place the lid on the
wood chip box.
Step 11
Insert all cooking grills into rack supports
respectively as shown. Make sure each
cooking grill is firm and level.