Spectra Logic T50E - Manual (Page 15)

Replacing the Flash (SD) Card
15
Replacing the Flash (SD) Card
Removing the Flash Card
Follow these steps to remove the card:
1. Power off the library—Press and hold the front panel power button for one second.
The power-off sequence takes approximately two minutes while the library allows
applications to shut down gracefully.
2. Push the flash card in until you feel it click, let it eject a short distance out of the
library, and then pull it gently out of the slot (see Figure 3).
If Support requests that you return the card, place it in a padded envelope mailer and
mail it to Spectra Logic (see Returning Components on page 20 for the mailing
address).
If you are not asked to return the component, dispose of it in the same manner as
other electrical components, such as computer monitors and keyboards.
Installing the Flash Card
Follow these steps to install the card:
1. Access the back of the library (see Figure 3).
Figure 2 Power off the library.
Power button