Spectra Logic T50E - Manual (Page 19)

Storing Configuration Changes
19
6. Select Run to execute the utility. After a brief delay, the Utility Results screen
appears, showing that the configuration file was uploaded and/or the configuration
restored.
Note: Running any one of these utilities requires the library to reboot.
Restoring the Configuration via Gathered Information
If there is no stored configuration, or if the restoration of the configuration from the
USB key fails, follow the procedures outlined in the Spectra T50e Library User Guide to
build new partitions and to program the necessary user settings. Use the information
that you gathered in You do not have a Valid Backup Library Configuration.
Rebuild the configuration in this order:
1. Option keys
2. Encryption keys
3. Partitions
4. Networking
5. Email and SMTP information
6. Date and Time
7. Settings
8. AutoSupport Log profiles
9. Users and passwords
Restarting Backups
After you restore the library configuration and the library finishes rebooting, use your
backup software to restart any backup processes.
Storing Configuration Changes
Spectra Logic recommends that you always store a copy of the current library
configuration on a USB device. Any time you make a change to a partition parameter,
the library asks you to save the configuration change to a USB device; Spectra Logic
recommends taking advantage of this feature.