Sprint Nextel 595U - Manual (Page 62)

54 Section 3A: Your USB Modem: The Basics
Ending a Connection
To end a connection:
ᮣ
In the Mobile Broadband window, click Stop.
This ends your data connection, and also your GPS connection, if it is open.
If Enable Network Adapter (NDIS) (page 69) has not been selected and you exit
Sprint Connection Manager while a connection is in progress, a window opens
asking whether you want to disconnect the call. Click Yes to end the connection
and exit Sprint Connection Manager. (See “Exiting Sprint Connection Manager”
on page 49.)
If Enable Network Adapter (NDIS) has been selected, manually disconnecting will
leave the USB modem disconnected. It will not reconnect until you remove and
reinsert the USB modem.
If GO automatically when ready (page 69) has been selected, manually
disconnecting will leave the USB modem disconnected. It will not reconnect until
one of the following occurs:
ⅷ You make a connection through Sprint Connection Manager
ⅷ A GPS fix is successfully acquired after you initiate Sprint Location Services
(page 43)
ⅷ You restart Sprint Connection Manager
Online Help
Sprint Connection Manager includes extensive online help to provide operating
hints and step-by-step instructions for getting the most from your USB modem.
With Sprint Connection Manager running, you can access online help in several
ways:
ⅷ
Press <F1> when Sprint Connection Manager is the active window.
ⅷ
From the Sprint Connection Manager window, select MENU > Help.
ⅷ
Right-click the system tray icon ( ) and select Help.
The help file has a table of contents and an index.
Note: The Stop button in the GPS Receiver window ends only your GPS connection; data
may still be transferred.