Set up, 1-gb, Preparing the cyber-shot station – Sony CSS-HD2 User Manual
Page 12
1-GB
Using a right-sliding station plate (such as
HD-A)
Using a left-sliding station plate (such as
HD-B)
Hold the Cyber-shot Station with one hand.
Hold the camera side guide of the station
plate with the other hand and slide the station
plate until it is pushed in all the way.
See the table in step 1 for the sliding direction.
Sliding to the right
Sliding to the left
Set up
Preparing the Cyber-shot Station
1
Select a station plate.
The station plates have a front side and bottom
side.
Front side
Sony logo
Bottom side
Plate name
Select the station plate corresponding with your
camera.
Model name
Plate name
Sliding
direction
DSC-T300
HD2-A
Right
DSC-W110
HD2-B
Left
DSC-W115
DSC-W120
DSC-W125
DSC-W130
DSC-W150
HD2-C
Left
DSC-W170
DSC-W300
HD2-D
Left
DSC-T2
HD2-E
Right
DSC-T70
DSC-T75
Attach the station plate.
Hold the station plate on the front side (the
side with the Sony logo) facing you, and place
it on the I/O unit of the Cyber-shot Station
as if you place it over the protection cover
attached on the I/O unit.