Notes on using the cyber-shot station – Sony CSS-HD2 User Manual

Page 8

Advertising
background image

-GB

Notes on using the Cyber-shot Station

Refer to the operating instructions for your camera as well as this manual.
The Cyber-shot Station is not a dust-proofed, moist-proofed, or water proofed product.
The CSS-HD2 can be used with the DSC-T300/T75/T70/T2/W300/W170/W150/W130/W125/W120/W115/

W110 digital still cameras. Not all of the above models are available in all countries and regions.
About the station plates

The Cyber-shot Station is supplied with 5 station plates that are

compatible with various digital cameras (hereinafter referred to as the

“camera”). See page 12 for further details.

Be sure to set the correct station plate that is compatible with your camera

before using. If you set the wrong station plate, the I/O unit could be

damaged.

The illustration in this manual shows the combination of DSC-T300 and

station plate for DSC-T300.

Precautions on use and storage locations:

Do not use or keep the Cyber-shot Station in locations subject to the following conditions. Otherwise, the

Cyber-shot Station could malfunction.

Locations subject to extreme high temperature

Temperatures in a hot sun or closed automobiles during summer may be extremely high, causing

deformation or malfunction of the Cyber-shot Station.

Locations under direct sunlight or near heaters

This may cause deformation or a malfunction of the Cyber-shot Station.

Locations subject to vibration

Locations subject to strong magnetism

Locations subject to dust particles in a sandy place or the beach

Precautions on use: 

Even if the CHARGE lamp is not lit, the unit is not disconnected from the AC power source (mains) as long

as it is connected to the wall outlet (wall socket). If some trouble occurs while using the unit, immediately

shut off the power by disconnecting the plug from the wall outlet (wall socket).

Use the nearest wall outlet to get the AC Adaptor plugged in. If any malfunctions occur using the product,

unplug the AC Adaptor to cut off the power source.

The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet,

even if the set itself has been turned off.

Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.

Do not use the Cyber-shot Station in locations that are subject to strong radio waves or radiation. Images

may not be played back properly.

Avoid other metallic objects from coming in contact with the connecting parts of the Cyber-shot Station

and the power cord. It may cause a short circuit.

Precautions on recorded data:

Please note that Sony will not be liable for recorded data such as images and audio data if you cannot record

or play back due to a malfunction of the camera, recording media, or the Cyber-shot Station.




Advertising