SMC Networks Barricade SMC7004AWBR - Manual (Page 47)

C
ONFIGURING THE
B
ARRICADE
4-13
Wireless Configuration
To configure the Wireless Barricade as a wireless access point for
wireless clients (either stationary or roaming), all you need to do is
define the radio channel, the domain identifier, and encryption
options.
You can use the Setup Wizard by clicking the “Enter” button at the
bottom of the page and changing the required settings, or you can
select “Channel and SSID” or “Encryption” from the Setup menu
on the left side of the screen.
Channel and SSID
You must specify a common radio channel and service domain
(i.e., Service Set ID) to be used by the Wireless Barricade and all of
your wireless clients. Be sure you configure all of your clients to
the same values.