Rj-45 port pin assignments – SMC Networks Barricade SMC7004AWBR User Manual
Page 83
Advertising
C
ABLES
B-3
RJ-45 Port Pin Assignments
All LAN ports on the Wireless Barricade support automatic MDI/
MDI-X configuration. This means that the pin signals in use will
depend on whether the LAN port is operating in MDI or MDI-X
mode. However, the WAN port is configured only for MDI-X mode.
Pin
MDI Signal Name*
MDI-X Signal Name*
1
Transmit Data (TD+)
Receive Data (RD+)
2
Transmit Data (TD-)
Receive Data (RD-)
3
Receive Data (RD+)
Transmit Data (TD+)
6
Receive Data (RD-)
Transmit Data (RD-)
Pins 4, 5, 7 and 8 are not connected.
* The “+” and “-” signs represent the polarity of the wires that make
up each wire pair.
Advertising