Samsung 570VTFT - Manual (Page 12)

English 10
User Controls
Your LCD allows you to easily adjust the characteristics of the image being displayed. All of
these adjustments are made using the control buttons on the front of the monitor. While you
use these buttons to adjust the controls, an OSD shows you their numeric values as they
change.
Figure 6. User control locations
No. Name Description
1 AUTO Activates the Auto Adjustment function.
2 EXIT
Exits from menus and sub-menus.
Exits from the on screen display (OSD).
3
Power
indicator
Glows green during normal operation.
Glows amber while the monitor is in a power
saving mode and if the signal cable becomes
disconnected.
4 Power button Turns the monitor on and off.
5
– / +
Brightness
Moves the selector between menus and
sub-menus on the OSD.
Decreases or increases values of the selected
function.
Directly adjusts the brightness level if pressed
while the OSD is off (See the section on
"Direct-Access Features" on page 11).
6 MENU
Opens the OSD system and sub-menus.
Selects the highlighted function.
EXIT MENU AUTO
1 2 3 4 5 6
Adjusting Your LCD Monitor
570V560V-E3p-28p Page 10 Wednesday, May 9, 2001 9:18 AM