Samsung 570VTFT - Manual (Page 9)

English 7
Plug and Play
Our adoption of the new VESA
®
Plug and Play solution eliminates complicated and time
consuming setup. It allows you to install your monitor in a Plug and Play compatible system
without the usual hassles and confusion. Your PC system can easily identify and configure
itself for use with your display. This monitor automatically tells the PC system its Extended
Display Identification (EDID) data using Display Data Channel (DDC) protocols so the PC
system can automatically configure itself to use the LCD. If your PC system needs a video
driver, following the instructions given below according to the operating system your
computer uses.
Installing the Video Driver
When prompted by the operating system for the monitor driver, insert the Driver diskette
(or CD) included with this monitor. Driver installation is slightly different from one operating
system to another. Follow the directions as appropriate for the operating system you have.
Windows ® 98
1 Windows
®
98 will auto-detect your new monitor and start the “Add New Hardware
Wizard” if the drivers are not already installed. Click the NEXT button to search for
drivers.
2 Check the diskette (or CD-ROM) drive box to install the drivers off the diskette (or CD)
provided with your LCD monitor and click
NEXT .
3 Confirm that Windows found the driver on the diskette (or CD) and click NEXT again
to install the driver.
To manually install or update the driver, follow the directions below:
E AUDIO IN jack
Connect a cable here to bring sound from your
computer’s sound card.
F
External
microphone jack
Connect an external microphone here. Using an
external microphone automatically disconnects
the monitor’s internal microphone.
G Headphone jack
Connect headphones here. Connecting
headphones automatically turns the speakers
off.
Table 1. Connector locations for multimedia bases ( Continued )
Item Name Description
Setting up Your Monitor
570V560V-E3p-28p Page 7 Wednesday, May 9, 2001 9:18 AM