Registering a user set, Setting up the printer (continued), U[ > ] s er na pre s s me – Sony UP-50 User Manual

Page 116

Advertising
background image

116

Installation and Adjustment

Setting Up the Printer (Continued)

U

[ > ]

S ER NA

PRE S S

ME

:

SYSTEM SETUP

LCD - CONTR : 7
BAUDRATE

: / 24 / 4800 / 96

BEEP

: OFF / ON

APPLI.

: STANDARD /

IRE

: 100 / 11 / 12 / 13

SAVE USER : 1 / 2 / 3 [ EXEC ]

PRN SETUP : PRESS [ > ]

USER NAME : PRESS [ > ]

Q1 A 1 S

COLOR : 200

Registering a User Set

You can store up to three settings of all the printer specifications, set or adjusted by
using the buttons or with the menu, and store those settings as a user set. The
printer retains these setting - even if you turn off the power.
Thus, different operators can make printouts with different settings by recalling the
appropriate user set.
If the data of the recalled user set is modified, the printer operates according to the
modified data. In such a case, the modified data remains effective until another user
set is recalled with the LOAD USER button, even if you turn off the power.

After you finish all of required settings, proceed as follows to register them as a
user set.

1

Display the SYSTEM SETUP menu.
To display the SYSTEM SETUP menu, see steps 1 to 3 in “Adjusting the
Brightness of the Printer Window Display” on page 110.

If you want to name a user set, go to step 2.
If you do not want to name a user set, go to step 5.

2

Select USER NAME by pressing the

F or f button.

8

2,4,5

3,4,6

4,7

3

LOAD USER button

Position the cursor at USER NAME
by pressing the

F

or

f

button.

Display USER NAME by
pressing the

F

or

f

button.

Advertising
This manual is related to the following products: