Sony UP-50 - Manual (Page 30)

30 Operation
PRN SPEED : / HIGH
MOTION CHK
S
PRE SS [ > ]
Y S T EM :
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY.
: 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
: OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM
: PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1 S
/ H I GH
PRN SPEED : / HIGH
MOTION CHK
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY.
: 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
: OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM
: PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1 S
PRN S P E ED :
/ H I GH
PRINTER SETUP COLOR : 200
/ COL / LAY / PRN / IN / OUT /
PRINT QTY.
: 1 [ 1 ~ 9 ]
INTERVAL : OFF / ON
GAMMA : S / NORMAL / H
: OFF / ON
LOAD USER : 1 / 2 / 3 [ EXEC ]
SYSTEM
: PRESS [ > ]
FUNCTION : PRESS [ > ]
C - BALANCE : PRESS [ > ]
Q1 A 1 S
PRN SPEED : / HIGH
MOTION CHK
PRN S P E ED :
3
Select PRN SPEED by pressing the F or f button.
When you use the UPC-540 Self Laminating Printing Pack, you can select the
finish of the printouts. (See “Selecting the Lamination Pattern” on page 114.)
4
Select the desired PRN SPEED by pressing the G or g button.
When you want to PRN SPEED
Make a printout at normal speed. NORMAL
Make a printout at high speed. HIGH
5
Select SYSTEM by pressing the F or f button.
Position the cursor at PRN SPEED
by pressing the
F or f button.
Press the F or f button until
PRN SPEED appears.
Switch the desired PRN SPEED to green by
pressing the
G or g button.
Display the desired PRN SPEED by
pressing the
G or g button.
Position the cursor at SYSTEM by pressing
the
F or f button.
Press the F or f button until
SYSTEM appears.
Making Variations of Printouts (Continued)