Making printouts with the desired user set number – Sony UP-50 User Manual
Page 21
21
Operation
L
1 / – / – [ EX EC ]
OAD US ER
LOAD USER
1 / 2 / 3 [EXEC]
:
Making Printouts with the Desired User Set Number
You can register all the printer settings as a user settings. The printer allows you to
register three sets of settings as User Set 1, 2 and 3. (See “Registering a User Set”
on page 116.) By selecting a desired user set number, the printer functions
according to the corresponding settings. You can change a part of the selected user
settings and make printouts.
Note
If you change the currently selected user set to another one, the image stored in
memory pages will be cleared.
1
Turn on the video monitor and printer.
2
Start the video source to display the source image on the video monitor.
This operation is done using the controls of the video equipment acting as the
source.
3
Press the LOAD USER button.
The currently selected user setting appears.
The currently selected user set number
is lit in green.
SOURCE/
MEMORY
MEMORY
PAGE
CAPTURE
ALARM
POWER
1
6
3,4
7
5
The currently selected user set
number is displayed.
Continue to the next page
c