Sony UP-970AD - Manual (Page 30)

Digi
ta
l Mo
de
Adjustments and Settings Using the Menu
30
a) The printing direction is as follows.
b) The print direction of the images printed is as follows.
MEDIA To select the type
of paper ME:HG: Uses UPP-210SE.
[ME: HD]: Uses UPP-
210HD.
ME:BL: Uses UPT-210BL.
However, the UP-970AD
model cannot use UPT-
210BL.
BACK: Cancels the setting
change and returns to the
item selection column.
MENU To print the menu
settings currently
selected [ME:OK]: Prints the menu
list currently set.
BACK: Cancels printing
and goes back to its item
column.
MIROR To print mirror
images. MI:ON: Prints mirror
images.
[MI:OFF]: Prints normal
images not mirror images.
BACK: Cancels the setting
change and returns to the
item selection column.
QTY To set the print
quantity [QT:1] to QT:255: Prints
from 1 to 255 copies of the
same image.
BACK: Cancels the setting
change and returns to the
item selection column.
RSIZE To adjust the size
of the image to
the size of the
printing paper. [RS:OFF]: prints the image
as it appears on the display.
RS:ON: Magnifies the
image to the size of the
printing paper.
BACK: Cancels the setting
change and returns to the
item selection column.
SAVE To register up to
three kinds of
settings SA:3: Registers the menu
settings as No.3.
SA:2: Registers the menu
settings as No.2.
[SA:1]: Registers the menu
settings as No.1.
BACK: Cancels the setting
change and returns to the
item selection column.
SHARP To adjust the
sharpness of the
printout [SH:0] to SH:14:You can set
the sharpness to any of 15
steps from 0 to 14. A higher
number indicates greater
sharpness. A setting of “0”
indicates that the function is
off, which is also the
default value.
BACK: Cancels the setting
change and returns to the
item selection column.
Item Function Settings
SIDE
b)
To select the
direction in which
the image is to be
printed S:SIDE: Prints the image
rotated by 90 degrees
counterclockwise.
[S:STD]: Prints the image in
the same direction as that
displayed on the monitor.
BACK: Cancels the setting
change and returns to the
item selection column.
BACK To exit menu
mode Select this item and press
the jog dial to exit the menu
mode.
Item Function Settings
When DI:NOR is selected When DI: REV is selected
Image displayed on the monitor
Printouts
When S:STD is selected. When S:SIDE is selected