Samsung P55 - Manual (Page 146)

1
 Click My Network Place> View network
connections on the Desktop.
 Right-click over Wireless Network Connection and
select Disable.
Q
When I connected 100Mbps/1Gbps wired LAN
and the computer exits standby/hibernate mode,
a message informing 10Mbps/100Mbps wired
LAN connection appears.
A When the computer exits standby/hibernate
mode, restoring the network takes about 3
seconds. When the network is restored, it
operates in 100Mbps/1Gbps.
Q
I cannot find an AP.
▶ Check the Wireless LAN LED.
A Check if the Wireless LAN LED is on. If off, press
the Wireless LAN On/Off button <Fn>+< > to
turn it on.
▶ Reinstall the driver.
A Reinstall the driver using the software media.
▶ Check the Wireless Zero Configuration (WZC) service.
A If the “Windows cannot make this wireless
connection” message appears while searching
for wireless networks, it indicates that a program
other than Windows is set to manage the wireless
LAN settings.
▶ To use the wireless LAN settings using Windows:
A  Click Start > Control Panel > Network and
Internet Connections > Network Connections
> Wireless LAN Connection, right-click and
check if the “Windows manages wireless network
settings (W)” option is selected in the
Wireless
Network tab of the Properties window. If not,
select the option.
Wireless LAN Related