Kodak SRP 30 - Manual (Page 103)

Operator’s Guide
Default Replenishment Rates
Solution Time in sec. Replenishment rates
Developer 33 60 ml/m 2
Bleach-fixing solution 33 100 ml/m 2
Stabilizer 69 60 ml/m 2 +
140 ml/m 2 water
Calibrating the Temperature Sensors and Water Pumps
WARNING: Calibrating the temperature sensors and water pumps presents
a potential safety hazard because it requires the wet section
cover to be open with power applied. Therefore, the following
functions should only be performed by a service technician:
•
Settings / Machine settings / PP Temperature
•
Settings / Machine settings / PP Pumps
4-28 KODAK PROFESSIONAL SRP 30 Laser Printer