Film mask: file print – Kodak SRP 30 User Manual
Page 145
Operator’s Guide
Film Mask: File Print
This screen results from selecting New or Edit from the Order configurations – List
screen (Page 4-67).
1. Select the sub-configurations PpF, Border, Paper config., and Cut length, as
described in Film Mask: 135, 120, 110, on Page 4-69.
2. Enable one of the following:
•
Fit image to paper (standard setting). The whole image is printed, but a white
border is added.
•
Fill print size. Uses center cropping. Some image information is lost.
•
Adjust: Shorter side. The shorter side of the image is adjusted to the paper
width. The whole image is printed. The cut length is variable.
•
Adjust: Longer side. The longer side of the image is adjusted to the paper
width. The whole image is printed. The cut length is variable.
4-70
KODAK PROFESSIONAL SRP 30 Laser Printer