Weekly cleaning procedure – Kodak A-61557 User Manual

Page 27

Advertising
background image

A-61557 December 2006

25

Weekly cleaning
procedure

A weekly cleaning should be performed approximately every fourth
regular cleaning cycle.

1. Before starting this procedure, perform the daily cleaning procedure

as outlined in the previous section.

2. Turn the scanner off.

3. Remove the scanner top cover.

4. Lift and remove the side cover.

5. Pull the exit stop wire out about 4 inches to provide adequate

clearance for removing the back cover.

NOTE: Do not remove the exit stop wire from the scanner. If you should

accidently remove it, when you reinsert it you will need to align
the exit wire with the holes in the scanner and wiggle it back into
place.

Advertising