Kenwood M-707I - Manual (Page 14)

14
M-707i
Selecting a desired fi le by fi le name
(For audio fi le only)
1 In stop mode, press FILE SEARCH button.
The icon “F-SEARCH” appears on the display.
2 Press the digit buttons A-Z to input the fi rst
character of the fi le name you want to search.
3
Press ENTER button.
“_” appears and fl ashes on the next of the fi rst
character.
4 Repeat step 2 and 3 to enter the characters
until the one before the last character.
5 For the last character, press the digit buttons
A-Z to input.
6
Press FILE SEARCH button.
“SEARCHING” appears on the display.
7 Press FWD PLAY 6 [6] button to start
playback.
⁄
• If the unit finds an appropriate file, the route name and the
file name will be scrolled on the display. Press TIME DISPLAY
button. Then the album number and track number will be
displayed.
• If there is no appropriate file, “NO FILE” is displayed.
Programming tracks/fi les
Programming tracks/fi les of a CD/audio fi le is possible
when playback is stopped. Up to 60 tracks can be
stored in the memory in any order.
1
In stop mode, press P.MODE button to enter
program setting.
The icon “PGM” and “– – P–01”/ “– – – P–01”
appears on the display.
“– –” indicates track number of the CD.
“– – –” indicates fi le number of the audio fi le.
“P–01” indicates program number.
The icon “PGM” starts fl ashing.
2
Press P.CALL/ALBUM 5 or ∞ [p.call/album up or
down] button, or digit buttons 0–9 to select the
desired track/fi le.
3
Press ENTER button to store the selected track/
fi le.
The track/fi le number returns to “– –”/ “– – –” and
the next program number appears on the display.
4
Repeat steps 2 to 3 to select and store other
desired tracks/fi les in this way.
The icon “PGM” appears on the display.
5 Press FWD PLAY 6 [6] button to play the
programmed tracks/fi les.
⁄
• “PROG ITEM FULL” appears on the display, if you attempt to
program more than 60 tracks/files.
• Audio files can only be programmed within the same source.
• To modify a program, press the ENTER button in stop mode.
Press the ENTER button to select the desired program
number.
Now enter the new track/file number with either method
below.
– Press the P.CALL/ALBUM 5 or ∞ [p.call/album up or
down] button to select the desired track/file.
– Press the CLEAR button to clear the track/file number
programmed. Select the new track/file number using digit
buttons “0” to “9” on the remote control unit.
• If you press REPEAT button during programmed playback,
the current track or all programmed tracks/files is/are played
repeatedly.
The icon “REP.” or “REP. ALL” and the icon “PGM” appear on the
display.
• Only for CD: If you press the INTRO button during
programmed playback, the first 10 seconds of every track/file
in the program will be played in sequence.
The icon “INTRO” and the icon “PGM” appear on the display.
To clear the program
Press 7 [7 stop] button once in stop mode, and
twice during program playback.
The icon “PGM” disappears from the display.
⁄
• “P” represents PROGRAM.
• The program is automatically cleared as soon as the CD tray is
opened.
• The function of program setting cannot be used in PLAY/
PAUSE mode.
Using the CD/USB device