Kenwood M-707I - Manual (Page 7)

English
7
Connecting the FM antenna
1 Connect the lead to the [FM ANT. 75Ω]
terminal.
2 Find the location that gives the best
reception.
3 Secure the antenna as high up as possible.
FM ANT.
75Ω
• The antenna supplied with the system is a basic antenna
for indoor use. For stable signal reception, the use of an
outdoor antenna (commercially available) is recommended.
Disconnect the indoor antenna first before connecting an
outdoor antenna.
Connecting the AM antenna
1 Connect the AM antenna cord to the [AM ANT.] and [ H]
terminals.
2 Setup the antenna in the position and the direction to be
able to receive AM broadcast.
• The antenna supplied with the system is for indoor use. Place
it as far away as possible from the system, your TV set, the
speaker cords, AC adapter and the power cord, and point it in
the direction that provides the best reception.
Connecting the speakers
1 Connect the right speaker to terminal marked “R”, with the
red wire to + and the black wire to –.
2 Connect the left speaker to terminal marked “L”, with the red
wire to + and the black wire to –.
Insert this portion.
• For optimal sound performance, it is recommended to use
the supplied speakers.
• Do not connect more than one speaker to any one pair of
+/– speaker terminals.
Connecting the iPod adapter
Compatibility of iPod adapter
iPod description Capacity Adapter number
iPod mini 4 GB & 6 GB 3
4G iPod & U2 iPod 20 GB 4
4G iPod 40 GB 5
iPod photo & Color U2 iPod 20 GB & 30 GB 6
iPod with color display 20 GB 6
60 GB 7
iPod photo 40 GB & 60 GB 7
• If your iPod is supplied with a dock adapter, use the supplied
dock adapter.
• See page 9 for the supported iPod models.
1 Choose the iPod adapter that fits your iPod.
2 Insert the iPod adapter into unit.
Adapter number
iPod dock
iPod adapter
3 Connect your iPod.
To remove iPod adapter
• Insert a thin object such as the tip of a flat-blade screwdriver
into the slit on the dock adapter and lift it to remove.