Konica Minolta IP-011 - Manual (Page 23)

Chapter 2 Setup
IP-011 Printer Controller 2-3
■ Installation of the Printer Driver
● Before Installation
Models and Environment of Computers
The Printer Controller for Konica 7020 series, IP-011, can be used with most computers ranging
from personal computers to workstations.
The IP-011 includes the printer driver for Windows95/98 and WindowsNT.
The printer driver can be installed to any models of computers as long as Windows95/98 and
WindowsNT have been installed to them.
About Windows95/98 and WindowsNT
Since on Windows95/98 and WindowsNT, the ways to manage the user interface and the printer
are different respectively, the ways to install the printer driver and the ways to print with the printer
vary. Therefore, the Konica IP-011 includes the printer driver for each Windows.
Please keep the “User Software CD” on hand since it is required to install the printer driver.
In this manual, the ways to install the printer driver to each Windows are explained in “Installation
to Windows95/98” and “Installation to WindowsNT4.0” separately. Please read the section of your
Windows.
● Files to be Installed
When the printer driver is installed with the “User Software CD”, the following files are installed to your computer.
The files to be installed vary, depending on the ways to install. Select an appropriate way.
Printer Driver for 95/98
Printer Driver for NT
Konica IP-011
Printer Tools
Konica IP-011 Help
Konica IP-011 Readme
Uninstaller
Installation to Windows95/98 Installation to WindowsNT
Add Printer
Setup. exe
(User Software CD)
Setup. exe
(User Software CD)
Plug & Play Add Printer