Konica Minolta IP-011 - Manual (Page 55)

Chapter 3 Printer Driver
IP-011 Printer Controller 3-17
Print using the following driver
Select the driver used for printing form the list shown by clicking the [ ▼ ] button beside [Details] tab-
[Print using the following driver] box. When a driver is changed, settings of presently shown
property are saved and the property of the newly selected driver will appear.
Set up-Original Paper
Select the original paper from the list shown by clicking the [ ▼ ] button beside [Setup] tab-[Paper]-
[Original Paper] box.
The original paper you can select is as follows:
Paper Sizes to Be Selected (US)
A3
A4
A4R
A5R
B5
B5R
Legal (8.5x14in)
Letter (8.5x11in)
LetterR (8.5x11in)
Statement (5.5x8.5in)
Paper Sizes to Be Selected (Europe/others)
A3
A4
A4R
A5R
B4
B5
B5R
B6R
8k
16k
16kR
F4
Ledger
Legal (8.5x14in)
Letter (8.5x11in)
LetterR (8.5x11in)
Statement (5.5x8.5in)
Refer to the operating manual of the copier for paper sizes which can be used on each tray.
[**R] indicates to feed paper from a short edge. Document sizes not including “R” indicate to feed
paper from a long edge.
Set up-Paper Size
When [Setup] tab-[Paper]-[Original Paper] has
been changed, [Setup] tab-[Paper]-[Paper Size]
is automatically set the same settings as
[Original Paper].
You can select other paper sizes than that
automatically set from the list shown by clicking
the [ ▼ ] button beside [Paper Size].
Paper sizes which you can select is the same as
those in the above-mentioned Paper-Original
Paper.
Refer to the operating manual of the copier for paper sizes which can be used on each tray.
[**R] indicates to feed paper from a short edge. Document sizes not including [R] indicate to feed
paper from a long edge.
S