Konica Minolta IP-011 - Manual (Page 52)

Chapter 3 Printer Driver
3-14 IP-011 Printer Controller
[8-Up] [9-Up]
When [Booklet] is selected in the Duplex printing, [2-Up] is automatically selected and you can not
select other settings.
When [Setup] tab-[Print Page Borders] check box is selected, you can print borders between
gathered documents.
Default of Print Page Borders is no check mark.
When Layout is set to [1-Up], you can not select [Print Page Borders].
New Driver
To use drivers which are not displayed on the list shown by clicking the [ ▼ ] button beside [Details] tab-
[Print using the following driver] box, click the [New Driver] button. When a driver is changed, the
settings of presently shown property is saved and the property of a newly selected driver is shown.
Option
Refer to Finisher and DB.
Option Tray
When the Option Tray is attached to the Konica
7020, it is required to set the [Option Tray] in the
[Option] tab. Select either [DB-209] or [DB-409].
Default of the Option Tray is [None].
By setting the Option Tray, functions are limited
or enabled as follows;
When [None] is selected in the Option Tray
settings or when the Option Tray is not
installed, you can not select [Tray 3] and
[Tray 4].
When [DB-409] is selected in the Option Tray settings, you can not select [Tray 4] as a paper tray.
When [DB-209] is selected in the Option Tray settings, you can select all trays as a paper tray.
N
O