KORG TONEWORKS AX5B - Manual (Page 6)

6
4. Value knob
In Edit mode, use this knob to adjust the value of a parameter. In Write
mode, you can use this knob to specify the writing-destination for the
program. In Program mode, this knob acts as the master volume.
5. Program Up switch
In Program mode, use this to select programs. The program number will
increase each time you press the switch. When the program/value dis-
play is indicating a parameter value, the LED in the upper part of this
pedal will be lit or blinking. (It will blink if the currently-displayed param-
eter can be assigned for control by the expression pedal.)
6. Program Down switch
In Program mode, use this to select programs. The program number will
decrease each time you press the switch. In Edit mode, press this to
make the effect or parameter type appear in the program/value display.
When the program/value display is indicating the type of effect or pro-
gram, the LED in the upper part of this pedal will be lit or blinking. (It will
blink if the currently-displayed parameter can be assigned for control by
the expression pedal.)
7. Pedal setting switch
This switches the control target (volume, wah, or effect parameter) of
the expression pedal. In Edit mode, you’ll use this to make settings for
controlling an effect parameter from the pedal. (p.9 “Expression pedal
settings”)
8. Expression pedal LED
This indicates the on/off status of the effect that’s selected for control by
the expression pedal (ON: lit, OFF: blinking).
9. Expression pedal
Use this to control volume, wah, or a parameter of another effect. By
advancing the pedal all the way forward to egage the switch underneath
it, you can switch the effect controlled by the expression pedal on/off.
(p.9 “Expression pedal settings”)
Rear panel
1 2 3
1. Input jack
Connect your bass to this jack.
2. Output jack
Connect this jack to your bass amp or headphones.
3. Power supply
DC9V
You can connect an optional AC adapter to this jack.
Setup
Installing batteries
1. Slide the cover of the battery case in the direction of the arrow, and
open the cover.
Insert four separately sold AA-size alkaline batteries, being sure to
observe the correct polarity (“+” and “-” markings), and close the
battery case.