Kodak 3000DSV-E - Manual (Page 32)

A-61371 September 2004 3-9
Selecting the image
density
Using Auto Exposure
1. Press the Exposure Mode key to select the Auto Exposure mode.
2. If the Auto Exposure setting is not satisfactory, press the appropriate
Exposure Adjustment key, either Lighter or Darker, to set the
desired image density.
Using Manual Exposure
1. Press the Exposure Mode key and select the Manual Exposure
mode.
2. Press the appropriate Exposure Adjustment key, either Lighter or
Darker, to set the desired image density.
Entering the number of
prints to be made Entering a number from 1-9
• Enter the desired number of prints using the Multi Print key “1”.
If the “1” key is pressed when “9” is displayed, the number on the
display is incremented by one: 10, 11, 12, etc.
Entering a number from 10- 99
1. Set the tens digit using the “10” key.
2. Set the units digit using the “1” key.
For example, to set “25” press the “10” key twice and press the “1” key
five times.