Kodak 3000DSV-E - Manual (Page 46)

A-61371 September 2004 3-23
Year, Month and Date
Set mode
The print pattern for the Date Print function can be set with this function.
1. Press and hold the Shift key and the Paper Selection key.
2. Select U6 in the User mode.
NOTE: Press the Exposure Mode key to display d*. The table below
shows the amount of time based on the setting value.
Year: 4 digits of dominical year
Month: 2 digits
Day: 2 digits
Hour: 2 digits (24-hour system)
Minutes: 2 digits
3. Press the Exposure Adjustment key (Darker or Lighter) to select the
desired setting value.
4. Press the Start key to validate the setting.
Set Imprint mode
If the time of day becomes incorrect for the Date function, you can reset
it by following the procedure below.
1. Press and hold the Shift key and the Paper Selection key.
2. Select U7 in the User mode.
3. Press the Exposure Mode key. When the Exposure Mode key is
pressed, both the Exposure Display and Multi-Print Display light up
steadily.
NOTE: In the initial condition, the year default setting is displayed.
Code Setting Value
d0 Year, month, day (2004.05.15)
d1 Month day year (05 15 2004)
d2 Day month year (15 05 2004)
d3 Month, day Hours:minutes (05.15 13:45)