Kenwood HM-335 - Manual (Page 11)

System connection
11 EN
1
Headphone jack %
Connect headphone with a stereo mini-plug
(optionally available).
2
BEAT CANCEL switch ¶
3 0 CD lid ^
To load or eject a CD, press the area marked 0 push
open on the CD lid to open it.
4
Display panel
5
volume knob $
Turn this knob for volume adjustment.
6 4 and ¢ multi control keys
In the normal mode, these are used to
– skip CD tracks &
– fast forward or rewind tape (
– select a preset radio station )
In the menu mode (selected by pressing the mode key),
press these buttons to select the desired menu item. To
set or enter setting of the menu item, press the set/sound
key.
• Pressing these (multi control keys) switches the dis-
play contents.
"TAPE RVS" (
"AUTO PRESET ?" or "AUTO MEMORY ?" ¡
(Only when the TUNER input is selected)
"INPUT ?"
fl
(Only when the AUX input is selected)
"TIMER ?"
·
"TIME ADJUST ?" ‡
"APS ?" 9
• The function of these keys returns to the normal mode
when they have not been operated for 20 seconds.
7 Tuning Mode key
CD, TAPE :
&(
Press to stop a disc or tape operation.
TUNER : ™
Press to switch between the AUTO (auto tuning,
stereo reception) and MONO (manual tuning,
monaural reception) modes.
Standby mode:
Press to display the clock.
Each press switches the mode.
Clock display on
Clock display dimmed
Clock display off
7
Cassette holder *
To load or eject a cassette tape, press the area marked
0 push open on the cassette holder to open it.
8
Basic operation keys
AUX key
fl
Press to reproduce the external source component
connected to the AUX (analog auxiliary input) jacks.
TUNER /band key )
Press to select the TUNER input.
This key is also used to select the received broadcast
band.
CD
6 key ^
Press to select the CD input and start playback. During
CD playback, press to pause.
TAPE
2 3 key *
Press to select the TAPE (cassette deck) input and
start playback of a tape. Pressing this key during tape
playback switches the tape transport direction.
9
POWER key (For U.S.A. and Canada) $
key (For other countries) $
Press to set the unit to On or Standby.
standby/timer indicator
Lights up when the unit is set to the Standby mode of
power.
Red : Ordinary standby.
Green : Timer standby.
Off : The unit is On.
0
Remote sensor #
This window receives signals from the remote control
unit.
!
rec key ¶
Press to start tape recording. Pressing this key during
recording initiates record-pause after leaving a no-
sound blank of about 4 seconds.
@
mode key 9
Press to switch the function of the
4 and ¢ keys to
menu select mode. Press again to reset the function of
the
4 and ¢ keys to normal mode.
#
set/sound key 9
Press to select EX. BASS or LOUD sound effect or
press to set or enter an item selected with the
4 and
¢ keys.
Controls and indicators
\ \ \ \
mode set/sound