Kenwood HM-335 - Manual (Page 15)

15 EN
Basic use method
Muting the sound temporarily
÷ Press again to resume the original volume.
÷ This is also canceled when the volume is changed.
Enhancement of bass
Each press switches the modes as follows.
1 "EX.BASS" lights.
The low frequencies are enhanced regardless
of the current volume level.
2 "LOUD" (Loudness) lights.
The low frequencies are enhanced according
to the current volume level. (Effective during
low-volume listening.)
3 Both indicators off.
Canceled.
÷ Headphone with a stereo mini plug can be con-
nected.
÷ The sound from all speakers are cut off.
Listening through headphone
Insert the headphone plug into the headphone jack.
The lowest and highest frequency bands can be
adjusted independently.
Tone adjustment
÷ The levels of both "BASS" and "TREBLE" can be ad-
justed in 2 steps in the range between – 8 and +8.
÷ Adjusting the tone while the "LOUD" or "EX.BASS"
indicator is lit turns it off and cancels the sound en-
hancement mode.
(To adjust the other frequency band, repeat steps
1 and 2 for it.)
÷ Adjusting the tone while the "LOUD" or "EX.BASS"
indicator is lit turns it off and cancels the sound en-
hancement mode.
1
Select the frequency band.
2
Adjust.
Each press switches the operation.
1 "BASS" (low frequency) adjustment
2 "TREBLE" (high frequency) adjust-
ment
3 Normal mode
(Go to step
2 within 8 seconds.)
Remote control unit only
MUTE
TONE
4 4
P.CALL
Remote control unit only
phones
push open
phones
set/sound
(Top view)
Blinks
SOUND
Remote control unit Main unit