Kyocera K122 - Manual (Page 18)

10 Making and Answering Calls
2. Select a timer:
–
Recent Calls —Tracks all calls you have
made and received since you last reset this
timer. To reset this timer to zero, select
Reset and press .
– Home Calls —Tracks all calls you have
made and received in your home service
area since you last reset this timer. To
reset this timer to zero, select
Reset and
press .
– Roam Calls —Tracks all calls you have
made and received outside of your home
service area since you last reset this timer.
To reset this timer to zero, select
Reset
and press .
3. Press to return to the Call Information
menu to select one of the following:
–
All Calls Timer —Tracks all calls you have
made and received. This timer cannot
be reset.
– Reset All Timers —Resets timers for all
recent, home, and roam calls.
Timing your calls
You can set your phone to beep 10 seconds
before each minute passes when you are on a call.
• Select
Menu → Settings → Sounds →
Minute Alert → Enabled .
Locking the keypad
The Keyguard locks your keypad to prevent
accidental key presses when the phone is turned
on and a call is not in progress. You can still
answer or silence an incoming call.
• To lock the keypad from the home screen,
press left and hold.
• To unlock the keypad, press
in this order.
Changing the keyguard setting
1. Select Menu → Settings → Keyguard .
2. Highlight an option. You can set the phone to
lock the keypad immediately, or automatically
if no key is pressed after 30 seconds,
1 minute, or 5 minutes.
• Press to save.
Controlling network roaming
Note: Roaming functions may not be available
on your phone. Check with your service provider
for availability.
Setting an alert for roaming
You may use this setting if you want the phone to
alert you when you roam outside of your home
service area.
1. Select Menu → Settings → Network →
Roam/Svc Alert .
2. Select an option and press .
82-G1675-1EN.book Page 10 Tuesday, September 12, 2006 2:50 PM