Kunz MR44K - Manual (Page 9)

Figure 6: ATV Tongue Assembly
OPERATIONS AND ADJUSTMENTS
Wire Lock Section of
Wire Lock Pin
(Placed Back From
Direction of
5/16” Wire
Direction of Travel Screw Pin Shackle
Clevis
Tongue
Shift Tongue Left or Right
Between Holes
Lock Pins
Travel)
f Follow
nstructions to avoid personal injury and/or property damage.
WARNING: Do not allow anyone to operate this equipment who has not fully read and
WARNING: Operator should be familiar with all functions of the unit.
. TONGUE CONFIGURATIONS AND ADJUSTMENTS
WARNING: Shut off the engine and allow the mower blades to come to a complete stop
The hitching system is designed so that the rough cut mower can be pulled directly behind a tow
When pulling the mower directly behind, the hitch pivot should be fastened on the right
This sa
these i ety alert symbol is used to indicate safety instructions.
Read and follow all instructions in this manual and the attached engine
manual.
comprehended the safety manual and who has not been properly trained in the safe
operation of the equipment.
A
before adjusting the tongue.
vehicle or offset to the left or right. See Figure 7.
Note:
carrier arm for maximum maneuverability. See Figure 5. When pulling the mower in
the offset position the hitch pivot can be fastened on either the right or left carrier arm.
See Figure 5.
8