Kenwood XD-A75 XD-A55 - Manual (Page 17)

17 EN
Program Playback
You can playback the tracks on the CDs in the disc
1-3 position in any order desired. By specifying the
disc numbers from 1 to 3, and the track numbers
from 1 to 99, you can choose up to 32 selections
for playback in the order you like.
1
When in the stop mode, use the disc number
buttons (DISC 1 - DISC 3) to select the desired
disc number.
2
Press the P. CALL 4 1 or ¡ ¢ button
to select the desired track.
3
Press the MEMORY/SET button.
• “PGM” will light up to show that the pro-
grammed sequence is being entered into
memory.
4
Repeat steps
1 - 3
for any other track. Up to
32 tracks can be programmed.
• If you make a mistake whilst in the program-
ming mode (“PGM” will light up) or if you wish
to change your selections, the programmed
tracks can be cleared by pressing the CLEAR
button. The tracks will be cleared sequentially,
starting with the last track entered.
5
Press the 3 button to start playback of pro-
grammed selections.
To clear the programmed selections :
Press the CLEAR button on the remote control
whilst the disc is stopped.
• Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
Notes :
• Opening the disc tray automatically cancels the
programmed sequence.
• Even if you press the POWER / ON/STANDBY
button to enter the standby mode or the func-
tion is changed from CD to some other func-
tion, the programmed selections will not be
cleared.
• During program playback operation, random play
is not possible.
1
2
2
3
3
5
5
CLEAR