KORG D4 - Manual (Page 64)

62
LOCATE
Here you can change the format of the counter display,
and use the counter to change the current time location.
1. Counter ............................................................................
In “LOCATE” mode, turning the [VALUE] dial will
change the counter display format. When you press the
CURSOR [
] key, the counter display will blink, and you
can use the [VALUE] dial to move the time location. Use
the CURSOR [
]/[ ] keys to select the units of move-
ment.
(MSM) The current time location is
shown as the absolute time from the beginning of the
song. From the left, the display units are Minutes:Sec-
onds.Milliseconds (1/1000th of a second).
(MBT) The current time location is
shown as the number of measures from the beginning of
the song. Use “RHYTHM” mode to specify the time signa-
ture and tempo. From the left, the display units are Mea-
sure.Beat.Tick (1/96th of a beat).
SONG SEL: Song select
Here you can select any song by name and/or number.
Another way to select the next-numbered song is to hold
down the [STOP] key and press the [FF] key while playback
is stopped. Similarly, to select the previous-numbered song,
hold down the [STOP] key and press the [REW] key while
playback is stopped at the beginning of the song (“00:00.00”).
These functions are available regardless of whether you are
in “SONG SEL” mode.
P.1 Song Select: select a song
1. SongSelect ............................................................. [1...99]
This selects the song. Use the [VALUE] dial to select the
desired song. When the display indicates the name and
number of the correct song, press the CURSOR [
] key
to recall the song.