Konica Minolta 7130 - Manual (Page 184)

Repeating Selected Image Area (Repeat: Verti./Horiz. Mode) (continued)
8-46
5.
Touch OK.
The Application Selection Screen will be restored.
6.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
7.
Select the desired magnification and copy size.
DETAILS
• APS and AMS are automatically released, and 1.00 (100%) is selected
as a magnification ratio.
• Copy mode is automatically set to 1a1. When selecting 1a2 mode,
Platen store mode will function automatically.
8.
Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-7 for details on setting print quantity.
9.
Position original FACE DOWN on the platen glass.
HINT
See the illustration on p. 8-44 for details.
10.
Press [START].
CAUTION
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.