Konica Minolta 7130 - Manual (Page 37)

Machine Configuration (continued)
2-7
6 Job No. icon is displayed when [START] is pressed to start a reserve job
of that number.
Your service representative can set the Job No. icon to display the page count while
scanning the originals, and also tha copy count when printing job starts, instead of
the job number.
7 COUNT/SET indicator indicates the print quantity entered from the control panel
keypad, and also indicates the print count on the left of the set count while printing.
8 Memory indicator indicates the remaining memory available for the next
operation.
9 SCAN key is touched to start scanning originals when any copy condition which
requires Store mode is selected, or Store mode is directly selected on the Applica-
tion Selection Screen.
10 Paper size/type indication area displays the paper size loaded in each tray and
paper type of the selected tray under the “SIZE” indication, if specified by the Key
Operator.
11 SIZE setting area is used to select the desired copy size or APS.
12 LENS setting area is used to select the desired magnification ratio.
13 DENSITY setting area is used to specify the desired exposure level.
14 MODE setting area is used to select the copy mode (1a1, 1a2, 2a1, or 2a2).
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
Changing
Paper Size