Konica Minolta 7130 - Manual (Page 279)

[12] Memory Switch (continued)
11-43
Key Operator Mode Screen Memory Switch Screen
Memory Switch Screen 2 Memory Switch Screen 3 Memory Switch Screen 4
Procedure
1 Touch [12] Memory SW on the Key Operator Mode Screen to display the Memory
Switch Screen.
2 Use the procedure below to select the desired item and change the setting.
(1) Touch the arrow keys c and d at the right on the Memory Switch Screen to select
the desired item.
(2) Touch the arrow keys
?
and
@
at the lower left to scroll the screen.
(3) Touch EDIT to change the setting of the highlighted item.
(4) Repeat above steps (1) to (3) to make several changes in succession.
3 Touch RETURN to restore the Key Operator Mode Screen.
4 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
11
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Data
Panel Contrast
Paper Type
Lock Job
Memory
E.C.M.
Preset Key
Copier Initial
System Initial
Key Operator
Mode